Planet Repeater Ethernet Fast Gigabit 10Base-T 100Base-TX 1000Base-T RJ-45 / 2x (POE-E202)

Planet Repeater Ethernet Fast Gigabit 10Base-T 100Base-TX 1000Base-T RJ-45 / 2x

Produktbeschreibung:

3-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input - 2-port data + power
output   Power over Ethernet 1-port data + power
input - Complies with IEEE 802.3at Power over
Ethernet Plus end-span/mid-span PD - Supports
PoE input power up to 30.8 watts 2-port data +
power output - Complies with IEEE 802.3af/IEEE
802.3at Power over Ethernet end-span PSE - Up
to 2 IEEE 802.3af/802.3at devices powered - Supports
PoE power up to 25 watts for each PoE port - Auto
detects powered device (PD) Extends the range
of PoE to an additional 100 meters (328ft.) Forwards
both Ethernet data and PoE power to remote device
  Layer 2 Features Hardware based 10/100/1000Mbps
auto-negotiation and auto MDI/MDI-X Integrates
address look-up engine,
supporting 2K absolute MAC addresses 10K iumbo
packet support IEEE 802.1Q VLAN transparency Features
Store-and-Forward mode with wire-speed filtering
and forwarding rates IEEE 802.3x flow control
for full duplex operation and backpressure for
half duplex operation Automatic address learning
and address aging Supports CSMA/CD protocol  
Case and Installation No external power cable
installation required Made of metal,
desktop size design Wall-mountable, Plug-and-Play
installation 0 ~ 50 degrees C operating temperature
  PoE Solution for Breaking RJ45 100m Limitation
PLANET POE-E202 is a 1-port PoE+ to 2-port 802.3af/at
Gigabit PoE Extender designed especially for point
to multipoint PoE application.
The POE-E202 can obtain a maximum of 30-watt PoE
power from PoE+ input port and supplies a maximum
of 25-watt PoE power budget for two PoE output ports,
extending both the Gigabit Ethernet Data and IEEE
802.3at/802.3af Power over Ethernet over the standard
100m (328 ft.) Cat.
5/5e/6 UTP cable to up to two 200m powered devices
at the same time.
The POE-E202 provides a simple solution for adding
PoE ports without running more cabling and achieves
more flexible network applications without requiring
an external power adapter.
  Plug and Play Installation The POE-E202 is quite
easy to be installed by simple plug and play.
It is used between a power source equipment (PSE)
and a powered device (PD).
The POE-E202 injects power to the PD without affecting
the data transmission performance.
The POE-E202 offers a cost-effective and quick
solution to doubling the standard range of PoE
from 100 to 200 meters.
The POE-E202 is designed in a compact box containing
three RJ45 ports,
of which one "PoE IN" port functions as PoE (Data
and Power) input and the other two "PoE OUT" ports
function as PoE output.
The "PoE OUT" port is also the power injector
that transmits DC voltage over the Cat5/5e/6 cable
and transfers data and power simultaneously between
the PSE and PD.
 

Technische Details: